GW Instek ASR-2000 Series - [:Source]:Simulation:normal<1|2>:Phase:stop:enable; [:Source]:Simulation:normal<1|2>:Phase:stop[:Immediate]

REMOTE CONTROL
103
Syntax
[:SOURce]:SIMulation:NORMal<1|2>:PHASe:STARt[:I
MMediate] {<NR2>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:NORMal<1|2>:PHASe:STARt[:I
MMediate]? [MINimum|MAXimum]
Parameter/Return
parameter
<1|2>
Normal 1 or Normal 2
<NR2>
ON Phs (start phase)
MINimum
0
MAXimum
359.9
Example
:SIM:NORM1:PHAS:STAR 0
Sets ON Phs to 0.
[:SOURce]:SIMulation:NORMal<1|2>
:PHASe:STOP:ENABle
Set
Query
Description
Enables/Disables (Fixed/Free) the OFF Phs
parameter of the normal1 or normal2 step for the
Simulation mode.
Syntax
[:SOURce]:SIMulation:NORMal<1|2>:PHASe:STOP
:ENABle {<bool>|OFF|ON|FREE|FIXED}
Query Syntax
[:SOURce]:SIMulation:NORMal<1|2>:PHASe:STOP
:ENABle?
Parameter/Return
parameter
<1|2>
Normal 1 or Normal 2
OFF | 0 |
FREE
Disabled
ON | 1 |
FIXED
Enabled
Example
:SIM:NORM1:PHAS:STOP:ENAB 1
Enable the OFF Phs.
[:SOURce]:SIMulation:NORMal<1|2>
:PHASe:STOP[:IMMediate]
Set
Query
Description
Sets or queries the OFF Phs parameter of the
normal1 or normal2 step for the Simulation mode.