GW Instek ASR-2000 Series - Data|Trace:simulation:store; Data|Trace:wave:clear; Data|Trace:wave[:Data]

REMOTE CONTROL
55
Syntax
:DATA|TRACe:SIMulation:RECall
{<NR1>|MINimum|MAXimum}
Parameter
<NR1>
0~9 (SIM0 ~ SIM9).
MIN
0
MAX
9
Example
:DATA:SIM:REC 1
Loads the data from SIM1.
:DATA|TRACe:SIMulation:STORe
Set
Description
Saves the simulation data. This command is the
equivalent saving a simulation memory in
Simulation mode (SIM0 ~ SIM9).
Syntax
:DATA|TRACe:SIMulation:STORe
{<NR1>|MINimum|MAXimum}
Parameter
<NR1>
0~9 (SIM0 ~ SIM9).
MIN
0
MAX
9
Example
:DATA:SIM:STOR 1
Saves the data from SIM1.
:DATA|TRACe:WAVe:CLEar
Set
Description
Clears the ARB 1-16 data for the selected wave
group.
Syntax
:DATA|TRACe:WAVe:CLEar
{<NR1>|MINimum|MAXimum}
Parameter
<NR1>
1~16 (ARB1 ~ ARB16).
MIN
Minimum
MAX
Maximum
Example
:DATA:WAV:CLE 13
Clears the wave data from ARB13.
:DATA|TRACe:WAVe[:DATA]
Set