GW Instek ASR-2000 Series - Measure[:Scalar]:Voltage:average; Measure[:Scalar]:Voltage:high; Measure[:Scalar]:Voltage:low; Measure[:Scalar]:Voltage[:Rms]

REMOTE CONTROL
61
:MEASure[:SCALar]:VOLTage[:RMS]
Query
Description
Returns the voltage (Vrms).
Query syntax
:MEASure[:SCALar]:VOLTage[:RMS]?
Return
<NR2>
Returns the voltage in Vrms.
:MEASure[:SCALar]:VOLTage:AVERage
Query
Description
Returns the voltage average value (Vavg).
Query syntax
:MEASure[:SCALar]:VOLTage:AVERage?
Return
<NR2>
Returns the voltage average value in volts.
:MEASure[:SCALar]:VOLTage:HIGH
Query
Description
Returns the output voltage maximum peak value
(Vmax).
Note:
Voltage maximum peak value is defined as the
highest peak value in the complete period.
Query syntax
:MEASure[:SCALar]:VOLTage:HIGH?
Return parameter
<NR2>
Returns the Vmax value in volts.
:MEASure[:SCALar]:VOLTage:LOW
Query
Description
Returns the output current minimum value (Vmin).
Note:
Voltage minimum value is defined as the lowest
value in the complete period.
Query syntax
:MEASure[:SCALar]:VOLTage:LOW?
Return parameter
<NR2>
Returns the Vmin value in volts.