GW Instek ASR-2000 Series Programming Manual

REMOTE CONTROL
39
9
10
11. Click the Configuration Icon. Under the IO
Settings tab check Enable Termination Character.
The termination character should be set as Line
Feed -\n.
11
12. Click the Input/Output icon. Under the Basic
I/O tab, make sure *IDN?\n is entered in the
Select or Enter Command drop box.
13. Click Query.
The ASR-2000 will return the machine
identification string into the buffer area:
GWINSTEK, ASR-2XXX, GXXXXXXXX,
XX.XX.XX.XXXX-X

GW Instek ASR-2000 Series Specifications

General

Brand	GW Instek
Model	ASR-2000 Series
Category	Portable Generator
Language	English