GW Instek ASR-3000 Series - Page 128

ASR-3000 Series User Manual
128
MEMUSB
Loads all the files including
Preset, Sequence, Simulate and
ARB from a USB flash drive to
the local memory.
Delete
Deletes (Recall Default) all the
files including Preset, Sequence,
Simulate and ARB from local
memory.
Example
Save all data from
Local memory to USB
All Data option selected
Single Arbitrary
Wave Default
From the previous step 4, execute the “Delete”
action to restore the selected ARB memory back to
the default setting.
All Arbitrary
Waves Default
From the previous step 9, execute the “Delete”
action to restore the entire ARB memory back to the
default setting.
Note
For default ARB waveform setting, please refer to page
120 through 127.