OPERATION
109
Manage Preset Settings
Preset settings can be easily saved to or recalled from a USB flash
drive using the Save/Recall Files utility in the Menu system.
Settings can also be deleted (Recalled Default) from local memory
using the utility.
When files are saved to USB they are saved in
the following format:
PresetX.Set, where X is the memory number
M0 ~ M9. The files are saved to USB:/gw.
When files are recalled from USB, files must be
recalled from the same memory number. For
example, the file Preset0.set can only be recalled
to memory number M0. The files can only be
recalled from the USB:/gw directory.
1. Press the Menu key. The Menu
settings will appear on the display.
2. Use the scroll wheel to go to item 9, Save/Recall
Files and press Enter.
3. Go to the Type setting using the scroll wheel
and press Enter. Select Preset and press Enter to
confirm.
4. Go to the Action setting and choose the file
operation and then press Enter.
Saves the selected preset
memory from the local memory
to a USB flash drive.
Loads a preset memory from a
USB flash drive to the selected
local memory.
To Next Page
Loading...
Need help?
General
