GW Instek ASR-3000 Series - Output Terminals

OPERATION
41
Cursor
3. Repeat the steps above for all the relevant
digits.
4. Press the Enter key to confirm the
edit.
Note
By default the cursor starts at the lowest digit of value.
Output Terminals
Background
The output terminals can be output from either
the front panel or from the rear panel. When
DC-INT mode or R200 range is selected, it is Not
available to output power from the front panel.
Supported Plugs
Multi-region terminal socket
Supported standards
IEC, North America, Japan.
EURO CEE type universal plug
WARNING
Dangerous voltages. Ensure that the power to the
instrument is disabled before handling the power
supply output terminals. Failing to do so may lead to
electric shock.
CAUTION
For the front panel output, the maximum output
voltage is 200 VAC and current is 15 A.