GW Instek ASR-3000 Series - Sequence Settings

ASR-3000 Series User Manual
156
Note
The Remote Sense will be forcibly set OFF and Slew
Rate Mode is set to time after entering the SEQ Mode.
It will automatically return to the previous setting after
exiting from the SEQ Mode.
Sequence Settings
Entering the
Sequence Menu
1. Press Test key.
Alternatively, it is available to
navigate, with scroll wheel, to the
TEST SEQ… option followed by
pressing the Enter key to enter the
SEQUENCE menu.
Note
It is available for AC+DC-INT, AC-INT and DC-INT
modes only.
2. Press Seq/Sim[F1] key to toggle to the
SEQUENCE Mode.
Sequence Mode
F1 soft-key
Note
It is available for AC+DC-INT mode only.