ASR-3000 Series User Manual
188
RS232 Remote Control Function Check
Invoke a terminal application such as Realterm.
For RS232, set the COM port, baud rate, stop bit,
data bit and parity accordingly.
To check the COM settings in Windows, see the
Device Manager. For example, in Win7 go to the
Control panel ā System ā Hardware tab.
If you are not familiar with using a terminal
application to send/receive remote commands from
the serial port, please see page 189 for more
information.
Run this query command via the terminal after
the instrument has been configured for
RS232 remote control (page 186).
*IDN?
This should return the Manufacturer, Model
number, Serial number, and Software version in
the following format.
GW-INSTEK, ASR-3XXX, GXXXXXXXX, XX.XX
Manufacturer: GW-INSTEK
Model number : ASR-3XXX
Serial number : GXXXXXXXX
Software version : XX.XX
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
To Next Page
Loading...
