GW Instek ASR-3000 Series - Page 200

ASR-3000 Series User Manual
200
9
10
11. Click the Configuration Icon. Under the IO
Settings tab check Enable Termination Character.
The termination character should be set as Line
Feed -\n.
11
12. Click the Input/Output icon. Under the Basic I/O
tab, make sure *IDN?\n is entered in the Select
or Enter Command drop box.
13. Click Query.
The ASR-3000 will return the machine
identification string into the buffer area:
GW-INSTEK, ASR-3XXX, GXXXXXXXX, XX.XX