GW Instek ASR-3000 Series User Manual

ASR-3000 Series User Manual
204
4. Key in the password when prompted and then
press Enter.
 The password is “5004”.
5. Go to Item 1, Update Firmware and press Enter.
Update Firmware
Exit [F4]
Exit
Press Exit[F4] to exit from the Update
Firmware settings.
6. Wait for the unit to update. Upon completion
the unit will automatically reboot.
7. Repeat the step 1 to 4 and go to “3. Update
Kernel (Factory service only)” (ASR-2000 only).
8. Wait for the unit to update. Upon completion
the unit will automatically reboot.
9. Load Default Setting.

GW Instek ASR-3000 Series Specifications

General

Brand	GW Instek
Model	ASR-3000 Series
Category	Portable Generator
Language	English