GW Instek ASR-3000 Series User Manual

APPENDIX
215
Recall Fail!
SEQ0 ~ SEQ9 or SIM0 ~ SIM9
Recall Fail!
Display Message
Only
Saved to SEQ#
Saved to SEQ0 ~ SEQ9
Display Message
Only
Saved to SIM#
Saved to SIM0 ~ SIM9
Display Message
Only
Save Fail!
SEQ0 ~ SEQ9 or SIM0 ~ SIM9
save Fail!
Display Message
Only
Sequence preparation...
Sequence preparation, please
wait some time
Display Message
Only
Sequence is ready.
Sequence is ready.
Display Message
Only
Simulation preparation...
Simulation preparation, please
wait some time
Display Message
Only
Simulation is ready.
Simulation is ready.
Display Message
Only
Save All Data
Ready to save all data
(Preset0~9 + SEQ0~9 + SIM0~9
+ ARB1~16)
Display Message
Only
All Data Saved Success
All data are saved successfully
(Preset0~9 + SEQ0~9 + SIM0~9
+ ARB1~16)
Display Message
Only
Recall All Data
Ready to recall all data
(Preset0~9 + SEQ0~9 + SIM0~9
+ ARB1~16)
Display Message
Only
All Data Recall Success
All data are recalled
successfully (Preset0~9 +
SEQ0~9 + SIM0~9 + ARB1~16)
Display Message
Only
Delete All Data
Ready to delete all data
(Preset0~9 + SEQ0~9 + SIM0~9
+ ARB1~16)
Display Message
Only
All Data Deleted
All data are deleted successfully
(Preset0~9 + SEQ0~9 + SIM0~9
+ ARB1~16)
Display Message
Only
Communication
Interface Messages
Description
Protection type
Rear USB Port
Connected To PC
Rear USB port connected to PC
Display Message
Only
Rear USB Port
Disconnected From PC
Rear USB port disconnected from
PC
Display Message
Only

GW Instek ASR-3000 Series Specifications

General

Brand	GW Instek
Model	ASR-3000 Series
Category	Portable Generator
Language	English