APPENDIX
229
Check if the equipment is
operating stably and free
from any vibration.
From the wind hole check if
the fan runs adequately and
make sure both wind speed
and wind volume are in
normal status.
Ensure that no abnormal
noise does happen.
Maintenance
Before shipping, we confirm that the proper
calibration procedure was implemented in each
unit. Nevertheless, in order to maintain the
highest performance, we strongly suggest that
the periodic calibration is necessary. Contact
your dealer or local distributor for calibration.
Gently wipe the unit by a soft cloth dipped with
neutral diluted detergent when the unit is in
need of cleaning. Avoid using volatile chemicals,
e.g., benzene, in that some irreversible results
may occur as follows.
Discolored surface
Printed characters erased
Clouded display
Before maintenance jobs, it is imperative to turn
Off the power switch and remove the power
cord from the unit as possible electric shock,
which leads to injury or death, may occur if not
doing so.
To Next Page
Loading...
Need help?
General
