ip count inbound-packets
• ip count outbound-packets
10. Assign an IP address to the interface.
ip address
11. Configure IP performance.
• ip forward-broadcast
• tcp mss
12. Configure policy-based routing.
ip policy-based-route
13. Configure UDP helper.
udp-helper server
14. Configure URPF.
ip urpf
15. Configure fast forwarding.
ip fast-forwarding
16. Configure basic IPv6 settings.
• ipv6 address
• ipv6 address auto link-local
• ipv6 mtu
• ipv6 nd autoconfig managed-address-flag
• ipv6 nd autoconfig other-flag
• ipv6 nd dad attempts
• ipv6 nd ns retrans-timer
• ipv6 nd nud reachable-time
• ipv6 nd ra halt
• ipv6 nd ra interval
• ipv6 nd ra prefix
• ipv6 nd ra router-lifetime
• ipv6 neighbors max-learning-num
• ipv6 policy-based-route
17. Configure NAT-PT.
natpt enable
18. Configure IS-IS.
• isis authentication-mode
• isis circuit-level
• isis circuit-type p2p
• isis cost
• isis dis-name
• isis dis-priority
• isis enable
• isis mesh-group
• isis small-hello
• isis timer csnp
• isis timer hello
• isis timer holding-multiplier
• isis timer lsp
• isis timer retransmit
• isis silent
19. Configure OSPF.
• ospf authentication-mode simple
• ospf authentication-mode
• ospf cost
• ospf dr-priority
• ospf mtu-enable
• ospf network-type
• ospf timer dead
• ospf timer hello