H3C MSR Series

41
Configuring MAC address authentication
802.11i does not support MAC address authentication.
To configure MAC address authentication:
Step Command
1. Enter system view.
system-view
2. Enter WLAN-BSS interface view.
interface wlan-bss
interface-number
3. Enable MAC port security mode.
port-security port-mode mac-authentication
Configuring PSK and MAC address authentication
For more information about port security configuration commands, see Security Configuration
Guide.
To configure PSK and MAC address authentication:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter WLAN-BSS interface
view.
interface wlan-bss
interface-number
N/A
3. Enable 802.11 key
negotiation.
port-security tx-key-type 11key
By default, 802.11 key negotiation
is not enabled.
4. Enable the PSK and MAC
port security mode.
port-security port-mode
mac-and-psk
N/A
5. Configure the pre-shared
key.
port-security preshared-key
{
pass-phrase
|
raw-key
} key
The key is a string of 8 to 63
characters, or a 64-digit hex
number.
Displaying and maintaining WLAN security
For more information about related display commands, see Security Command Reference.
Task Command Remarks
Display WLAN service
template information.
display wlan service-template
[ service-template-number ] [
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view.
Display MAC address
authentication information.
display mac-authentication
[
interface
interface-list ] [
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view.
Display the PSK user
information of port security.
display port-security
preshared-key user
[
interface
interface-type interface-number ] [
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view.
Display the configuration
information, running state and
statistics of port security.
display port-security
[
interface
interface-list ] [
|
{
begin
|
exclude
|
include
} regular-expression ]
Available in any view.
Display 802.1X session
display dot1x
[
sessions |
Available in any view.