H3C MSR Series

32
Step Command Remarks
By default, the scan mode is auto.
4. Set the scan type.
scan type
{
active
|
passive
}
Optional.
By default, the scan type is
passive
.
5. Set the scan report interval.
scan report-interval
seconds
Optional.
By default, the scan report interval
is 10 seconds.
6. Configure only non-dot11h
channels to be scanned.
autochannel-set avoid-dot11h
Optional.
By default, the default setting of
the command depends on the
scan channel
command.
Displaying and maintaining WLAN RRM
Task Command Remarks
Display WLAN RRM information.
display wlan rrm
[
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view.