52
Figure 24 Configuring the wireless card (3)
Verifying the configuration.
• Enter the username user and password dot1x. The client can pass 802.1X authentication and
access the WLAN.
• You can use the display wlan client command, display connection command and display
dot1x command to view the online clients.
Supported combinations for ciphers
This section introduces the combinations that can be used during the cipher suite configuration.
RSN
For RSN, the WLAN-WSEC module supports only AES-CCMP and TKIP ciphers as the pair wise
ciphers and WEP cipher suites are only used as group cipher suites. Below are the cipher suite
combinations that WLAN-WSEC supports for RSN. (WEP40, WEP104 and WEP128 are mutually
exclusive).
Unicast cipher Broadcast cipher Authentication method Security Type
CCMP WEP40 PSK RSN
CCMP WEP104 PSK RSN
CCMP WEP128 PSK RSN
To Next Page
Loading...
