H3C WA Series Command Reference

12-16
Field Description
Sent packets:
Total: 0
urgent packets: 0
control packets: 0 (including 0 RST)
window probe packets: 0
window update packets: 0
data packets: 0 (0 bytes) data
packets retransmitted: 0 (0 bytes)
ACK only packets: 0 (0 delayed)
Statistics of sent packets, including
z Total number of packets
z Number of packets containing an urgent indicator
z Number of control packets
z Number of window probe packets
z Number of window update packets
z Number of data packets
z Number of retransmitted packets
z Number of ACK packets
Retransmitted timeout Number of packets whose retransmission times out
connections dropped in retransmitted timeout
Number of connections dropped because of
retransmission timeout
Keepalive timeout Number of keepalive timeouts
keepalive probe Number of keepalive probes
Keepalive timeout, so connections disconnected
Number of connections dropped because of keepalive
response timeout
Initiated connections Number of initiated connections
accepted connections Number of accepted connections
established connections Number of established connections
Closed connections Number of closed connections
dropped
Number of dropped connections (after SYN is
received from the peer)
initiated dropped
Number of initiated but dropped connections (before
SYN is received from the peer)
display tcp ipv6 status
Syntax
display tcp ipv6 status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display tcp ipv6 status command to display the IPv6 TCP connection status, including the
IPv6 TCP control block address, local and peer IPv6 addresses, and status of the IPv6 TCP connection.
Examples
# Display the IPv6 TCP connection status.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English