H3C WA Series Command Reference

10-14
undo ip unreachables
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ip unreachables enable command to enable the sending of ICMP destination unreachable
packets.
Use the undo ip unreachables command to disable sending ICMP destination unreachable packets.
Sending ICMP destination unreachable packets is disabled by default.
Examples
# Enable sending ICMP destination unreachable packets.
<Sysname> system-view
[Sysname] ip unreachables enable
reset ip statistics
Syntax
reset ip statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset ip statistics command to clear statistics of IP packets.
Related commands: display ip interface (IP Addressing in the Layer 3 – IP Services Command
Reference); display ip statistics (IP Performance Optimization in the Layer 3 – IP Services Command
Reference).
Examples
# Clear statistics of IP packets.
<Sysname> reset ip statistics
reset tcp statistics
Syntax
reset tcp statistics

H3C WA Series Specifications

General

Category	Wireless Access Point
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Wireless Protocol	802.11 a/b/g/n/ac
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Band	2.4GHz, 5GHz
Antenna	Internal/External
Ports	Gigabit Ethernet ports
Power Supply	PoE
Security	WPA, WPA2, WPA3
Management	Web, CLI, SNMP
Storage Temperature	-40°C to 70°C
Mounting	Wall, Ceiling
Model	H3C WA Series