H3C WA Series Command Reference

12-2
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : HU
Label : NULL Tunnel ID : 0
TimeStamp : Date- 7/14/2007, Time- 15:17:15
Interface : InLoopBack0
Table 12-1 display ipv6 fib command output description
Field Description
Total number of Routes Total number of routes in the FIB
Destination Destination address
PrefixLength Prefix length of the destination address
NextHop Next hop
Flag
Route flag:
z U — Usable route
z G — Gateway route
z H — Host route
z B — Black hole route
z D — Dynamic route
z S — Static route
Label Label
Tunnel ID ID of a tunnel
TimeStamp Generation time of a FIB entry
Interface Outgoing interface
display ipv6 fibcache
Syntax
display ipv6 fibcache
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 fibcache command to display the total number of routes in the IPv6 FIB cache.
Examples
# Display the total number of routes in the IPv6 FIB cache.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English