12-11
Field Description
FA Remote address and remote port number
sndbuf Size of the send buffer
rcvbuf Size of the receive buffer
sb_cc Number of bytes sent by the send buffer
rb_cc Number of bytes received by the receive buffer
socket option Socket option set by the application
socket state State of the socket
display ipv6 statistics
Syntax
display ipv6 statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 statistics command to display statistics of IPv6 packets and ICMPv6 packets.
You can use the reset ipv6 statistics command to clear all IPv6 and ICMPv6 packet statistics.
Examples
# Display the statistics of IPv6 packets and ICMPv6 packets.
<Sysname> display ipv6 statistics
IPv6 Protocol:
Sent packets:
Total: 0
Local sent out: 0 forwarded: 0
raw packets: 0 discarded: 0
routing failed: 0 fragments: 0
fragments failed: 0
Received packets:
Total: 0
local host: 0 hopcount exceeded: 0
format error: 0 option error: 0
protocol error: 0 fragments: 0
reassembled: 0 reassembly failed: 0
reassembly timeout: 0
To Next Page
Loading...
Need help?
General
