H3C WA Series Command Reference

4-7
interface interface-type interface-number: Clears the ARP entries for the interface specified by the
argument interface-type interface-number.
Description
Use the reset arp command to clear ARP entries except authorized ARP entries from the ARP mapping
table.
With interface interface-type interface-number or slot slot-id specified, the command clears only
dynamic ARP entries of the interface or the slot.
Related commands: arp static and display arp.
Examples
# Clear all static ARP entries.
<Sysname> reset arp static
Gratuitous ARP Configuration Commands
gratuitous-arp-sending enable
Syntax
gratuitous-arp-sending enable
undo gratuitous-arp-sending enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the gratuitous-arp-sending enable command to enable the AP to send gratuitous ARP packets
when receiving ARP requests from another network segment.
Use the undo gratuitous-arp-sending enable command to restore the default.
By default, an AP cannot send gratuitous ARP packets when receiving ARP requests from another
network segment.
Examples
# Disable the gratuitous ARP packet sending function.
<Sysname> system-view
[Sysname] undo gratuitous-arp-sending enable
gratuitous-arp-learning enable
Syntax
gratuitous-arp-learning enable
undo gratuitous-arp-learning enable

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English