H3C WA Series Command Reference

5-1
z Support of the H3C WA series WLAN access points (APs) for commands may vary by AP model.
For more information, see Feature Matrix.
z The interface types and the number of interfaces vary by AP model.
z The models listed in this document are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
5 DHCP Server Configuration Commands
z The DHCP server configuration is supported only on VLAN interfaces and loopback interfaces. The
subaddress pool configuration is not supported on loopback interfaces.
z Support for DHCP server configuration commands depends on the AP model.
DHCP Server Configuration Commands
bims-server
Syntax
bims-server ip ip-address [ port port-number ] sharekey key
undo bims-server
View
DHCP address pool view
Default Level
2: System level
Parameters
ip ip-address: Specifies an IP address for the BIMS server.
port port-number: Specifies a port number for the BIMS server in the range 1 to 65534.
sharekey key: Specifies a shared key for the BIMS server, which is a string of 1 to 16 characters.
Description
Use the bims-server command to specify the IP address, port number, and shared key of the BIMS
server in the DHCP address pool for the client.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English