H3C WA Series Command Reference

5-26
static-bind mac-address
Syntax
static-bind mac-address mac-address
undo static-bind mac-address
View
DHCP address pool view
Default Level
2: System level
Parameters
mac-address: The MAC address of a static binding, in the format of H-H-H.
Description
Use the static-bind mac-address command to statically bind a MAC address to an IP address in a
DHCP address pool.
Use the undo static-bind mac-address command to remove the statically bound MAC address.
By default, no MAC address is statically bound.
Note that:
z Use the static-bind mac-address command together with the static-bind ip-address command
to complete a static binding configuration.
z If you use the static-bind mac-address or static-bind client-identifier command repeatedly, the
latest configuration will overwrite the previous one.
Relate command: dhcp server ip-pool, static-bind client-identifier, static-bind ip-address, display
dhcp server tree.
Examples
# Bind the client MAC address 0000-e03f-0305 to the IP address 10.1.1.1 with the mask 255.255.255.0
in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind mac-address 0000-e03f-0305
tftp-server domain-name
Syntax
tftp-server domain-name domain-name
undo tftp-server domain-name
View
DHCP address pool view
Default Level
2: System level

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English