H3C WA Series Command Reference

10-16
Description
Use the tcp timer fin-timeout command to configure the length of the TCP finwait timer.
Use the undo tcp timer fin-timeout command to restore the default.
By default, the length of the TCP finwait timer is 675 seconds.
Note that the actual length of the finwait timer is determined by the following formula:
Actual length of the finwait timer = (Configured length of the finwait timer – 75) + configured length of the
synwait timer
Related commands: tcp timer syn-timeout and tcp window.
Examples
# Set the length of the TCP finwait timer to 800 seconds.
<Sysname> system-view
[Sysname] tcp timer fin-timeout 800
tcp timer syn-timeout
Syntax
tcp timer syn-timeout time-value
undo tcp timer syn-timeout
View
System view
Default Level
2: System level
Parameters
time-value: Length of the TCP finwait timer in seconds, ranging from 2 to 600.
Description
Use the tcp timer syn-timeout command to configure the length of the TCP synwait timer.
Use the undo tcp timer syn-timeout command to restore the default.
By default, the length of the TCP synwait timer is 75 seconds.
Related commands: tcp timer fin-timeout and tcp window.
Examples
# Set the length of the TCP synwait timer to 80 seconds.
<Sysname> system-view
[Sysname] tcp timer syn-timeout 80
tcp window
Syntax
tcp window window-size
undo tcp window
View
System view

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English