H3C WA Series Command Reference

12-14
Field Description
Received packets:
Total: 0
checksum error: 0 too short:
0
bad code 0
unreached: 0 too big: 0
hopcount exceeded: 0 reassembly timeout:
0
parameter problem: 0 unknown error type: 0
echoed: 0 echo replied: 0
neighbor solicit: 0 neighbor advert:
0
router solicit: 0 router advert 0
redirected: 0
router renumbering 0
unknown info type: 0
Deliver failed:
bad length: 0 ratelimited: 0
Statistics of received ICMPv6 packets, including
z Total number of received packets
z Number of packets with checksum errors
z Number of too small packets
z Number of packets with error codes
z Number of packets whose destination is
unreachable
z Number of too large packets
z Number of packets exceeding the hop limit
z Number of packets whose fragmentation and
reassembly times out
z Number of packets with parameter errors
z Number of packets with unknown errors
z Number of request packets
z Number of response packets
z Number of neighbor solicitation messages
z Number of neighbor advertisement packets
z Number of router solicitation packets
z Number of router advertisement packets
z Number of redirected packets
z Number of packets recounted by the router
z Number of unknown type of packets
z Number of packets with a incorrect size
z Number of packets failing to be received because
of rate limitation
display tcp ipv6 statistics
Syntax
display tcp ipv6 statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display tcp ipv6 statistics command to display IPv6 TCP connection statistics.
You can use the reset tcp ipv6 statistics command to clear statistics of all IPv6 TCP packets.
Examples
# Display the statistics of IPv6 TCP connections.
<Sysname> display tcp ipv6 statistics
Received packets:
Total: 0
packets in sequence: 0 (0 bytes)
window probe packets: 0, window update packets: 0

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English