H3C WA Series Command Reference

7-3
display dns server
Syntax
display dns server [ dynamic ]
View
Any view
Default Level
1: Monitor level
Parameters
dynamic: Displays the DNS server information dynamically obtained through DHCP or other protocols
Description
Use the display dns server command to display the IPv4 DNS server information.
Related commands: dns server.
Examples
# Display the IPv4 DNS server information.
<Sysname> display dns server
Type:
D:Dynamic S:Static
DNS Server Type IP Address
1 S 169.254.65.125
Table 7-3 display dns server command output description
Field Description
DNS Server Sequence number of the DNS server, configured automatically by the AP, starting from 1.
Type
Type of domain name server: S represents a statically configured DNS server, and D
represents a DNS server obtained dynamically through DHCP.
IP Address IPv4 address of the DNS server
display ip host
Syntax
display ip host
View
Any view
Default Level
1: Monitor level
Parameters
None

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English