H3C WA Series Command Reference

8-3
display ipv6 host
Syntax
display ipv6 host
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 host command to display the mappings between host names and IPv6
addresses in the static domain name resolution table.
Related commands: ipv6 host.
Examples
# Display the mappings between host names and IPv6 addresses in the static domain name resolution
table.
<Sysname> display ipv6 host
Host Age Flags IPv6Address
aaa 0 static 2002::1
bbb 0 static 2002::2
Table 8-3 display ipv6 host command output description
Field Description
Host Host name
Age Time for the entry to live. “0” is displayed in the case of static configuration.
Flags Type of the mapping. Static indicates a static mapping.
IPv6Address IPv6 address of a host
dns server ipv6
Syntax
dns server ipv6 ipv6-address [ interface-type interface-number ]
undo dns server ipv6 ipv6-address [ interface-type interface-number ]
View
System view
Default Level
2: System level
Parameters
ipv6-address: IPv6 address of a DNS server.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English