H3C WA Series Command Reference

10-17
Default Level
2: System level
Parameters
window-size: Receiving/sending buffer size of TCP connection in KB, ranging from 1 to 32.
Description
Use the tcp window command to configure the receiving/sending buffer size of TCP connection.
Use the undo tcp window command to restore the default.
The TCP receiving/sending buffer is 8 KB by default.
Related commands: tcp timer fin-timeout and tcp timer syn-timeout.
Examples
# Configure the receiving/sending buffer of TCP connection as 3 KB.
<Sysname> system-view
[Sysname] tcp window 3

H3C WA Series Specifications

General

Category	Wireless Access Point
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Wireless Protocol	802.11 a/b/g/n/ac
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Band	2.4GHz, 5GHz
Antenna	Internal/External
Ports	Gigabit Ethernet ports
Power Supply	PoE
Security	WPA, WPA2, WPA3
Management	Web, CLI, SNMP
Storage Temperature	-40°C to 70°C
Mounting	Wall, Ceiling
Model	H3C WA Series