Certification
50081_Certification.fm Page 169
Certification
Hach Company certifies this instrument was tested thoroughly, inspected and found to
meet its published specifications when it was shipped from the factory. The AutoCAT
9000 titration workstation has been tested and is certified as indicated to the following
instrumentation standards:
Product Safety
UL 61010A-1 (ETLus listing mark)
CSA C22.2 No. 1010.1 (ETLc certification mark)
Certified by Hach to EN 61010-1 Amd.'s 1 & 2 per 73/23/EEC, supporting test records
with APAVE, report No. 20111436.
Immunity
EN 61326:98 (EMC Requirements for equipment for measurement, control and
laboratory use) per 89/336/EEC EMC: Supporting test records by Hach Company,
certified compliance by Hach Company.
Standards include:
EN 61000-4-2 (IEC 1000-4-2) Electro-Static Discharge
EN 61000-4-3 (IEC 1000-4-3) Radiated RF Electro-Magnetic Fields
EN 61000-4-4 (IEC 1000-4-4) Electrical Fast Transients/Burst
EN 61000-4-5 (IEC 1000-4-5) Surge
EN 61000-4-6 (IEC 1000-4-6) Conducted Disturbances Induced by RF Fields
EN 61000-4-11 (IEC 1000-4-11) Voltage Dips, Interruptions and Variations
Emissions
Per 89/336/EEC EMC: EN 61326:1998 (Electrical Equipment for measurement, control
and laboratory use-EMC requirements) Class “B” emission limits. Supporting test
records by Intellistor O.A.T.S. (NVLAP # 0369)and certified compliance by Hach
Company.
Standards include:
EN 61000-3-2 Harmonic Disturbances Caused by Electrical Equipment
EN 61000-3-3 Voltage Fluctuation (Flicker) Disturbances Caused by Electrical
Equipment
Additional Emissions Standard/s include:
EN 55011 (CISPR 11), Class “A” emission limits. Supporting test records with
AEMC Measures (CB # 1-0543) report No. L01033.
CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATION,
IECS-003, Class A: Supporting test records with AEMC Mesures (CB # 1-0543) report
No. L01033, certified compliance by Hach Company.
To Next Page
Loading...
