Basic Operation
Basic Operation
Page 28
50081_Operation.fm
3.3.4 Set the Time
1. Highlight Time.
2. Press the
CHECK MARK to confirm the selection.
3. Input the hour (00 to 23). Press the
RIGHT key to scroll to minutes.
4. Input the minutes (00 to 59). Press the
RIGHT key to scroll to seconds.
5. Input the seconds (00 to 59). Press the
CHECK MARK to validate and return to the
Configuration Menu.
Note:Press the LEFT arrow to access a previous field.
3.3.5 Set the Date
1. Highlight Date.
2. Press the
CHECK MARK to confirm the selection.
3. Input the day (1 to 31). Press the
RIGHT key to scroll to Month.
4. Select the month using the
UP or DOWN key. Press the RIGHT key to scroll to Year.
5. Input the year (2000 to 2069). Press the
CHECK MARK to validate and return to the
Configuration Menu.
Note:Press to access a previous field.
3.3.5.1 Select Optional PC Keyboard
Select an optional, external keyboard to connect to the 6-pin PS/2 receptacle located on
the right hand side, bottom edge of the instrument.
1. Scroll to highlight PC Keyboard.
2. Press the
CHECK MARK to confirm the selection.
3. Press the
UP or DOWN key Highlight English (US) for a standard, QWERTY-type
keyboard.
4. Press the
CHECK MARK to validate and return to the Configuration Menu.
Note:When using the optional keyboard, press F12 to enter the Setup menu. This is done by
pressing the Fn and F2 keys simultaneously.
3.3.6 Selecting the ac Power Frequency
Select the ac power supply frequency (50 Hz/230 V ac or 60 Hz/115 V ac) to optimize
instrument operation for regional power.
1. Highlight AC Power Frequency.
2. Press the
CHECK MARK to confirm the selection.
3. Press the
UP or DOWN key to highlight the desired setting.
Note: The default, 60-Hz /125-V ac setting is required for operation in the U.S. and Canada.
4. Press the CHECK MARK to validate and return to the Configuration Menu.
To Next Page
Loading...
