Hach Met One 6000 Series User Manual

28
Installation
3.6.10.2 Flow alarm test
For units with a flow monitor, temporarily remove the central vacuum from the unit. The
measured voltage can be found from equation (2):
(2)
where: RL = value of the load resistor in ohms
Example: for a 100-ohm resistor, this voltage should be less than 0.20 volts.
Voltage < 0.002 RL×()=

Hach Met One 6000 Series Specifications

General

Brand	Hach
Model	Met One 6000 Series
Category	Cash Counter
Language	English