hager hw+ User Manual

1016LE008146B
Measurement functions
6.13 Measurement parameters
Adjusting the reference phase sequence
This parameter is used to configure the sequence of phases for the network supplying the
sentinel Energy circuit breaker. In the case of a network with inverse phase rotation, the
reference sequence is: 1, 3, 2.
Phase sequence setting Default setting
1, 2, 3 - 1, 3, 2 1, 2, 3
Phase sequence
1,2,3
1
L1 L2 L3
2
3
1,3,2

hager hw+ Specifications

General

Brand	hager
Model	hw+
Category	Circuit breakers
Language	English