110 6LE008146B
Alarm management
7.4 Trip alarms
Following a circuit breaker tripping, the trip alarms display a message window on the sentinel
Energy display and the panel display.
They indicate the type of trip as well as useful information related to the cause of tripping
The message window must be acknowledged after handling the tripping fault and before
restarting the circuit breaker.
The pop-up flashes.
TRIP
Briefly press the trip unit's OK button to hold the window and display the tripping type as well
as additional information about what caused it.
Do a long press for more than 3 seconds to acknowledge and close the message.
To Next Page
Loading...
