Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 107
Option Description
Static IP Choose this option if you are a leased line user with a
fixed IP address.
DHCP Client Choose this option if you are connected to the Internet
through a Cable modem line.
PPPoE Choose this option if you are connected to the Internet
through a DSL line
PPTP Choose this option if you are connected to the PPTP
Server
WAN
Access
Type
L2TP Choose this option if you are connected to the L2TP
Server
Host Name The name of the DHCP host
IP Address Check with your ISP provider
Subnet Mask Check with your ISP provider
Default Gateway Check with your ISP provider
User Name User name for PPPoE registration recognized by the
Internet service provider
Password Password for PPPoE registration recognized by the
Internet service provider
Service Name
Service Name for PPPoE registration recognized by the
Internet service provider
Continuous The connection is always on
Connect on
Demand
Enter the minutes after which the session must be
disconnected, if no activity takes place
Connection
Type
Manual Manually connect
Idle Time Enter the minutes after which the session must be
disconnected
WAN Physical Dynamic IP or Static IP for PPP Connection
MTU Size Specify the network MTU rate
Attain DNS Automatically Obtain DNS server address automatically
DNS 1 (Primary DNS Server) Check with your ISP provider
DNS 2 (Secondary DNS Server) Check with your ISP provider
DNS 3 (Third DNS Server) Check with your ISP provider

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English