Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 150
28. Save/Reload Settings
This page allows you save current settings to a file or reload the settings from the file which was saved
previously.
Besides, you could reset the current configuration to factory default.
If you do make changes to the default configuration but then wish to revert back to the original factory
configuration, you can do so by resetting the device to factory defaults.
28.1 Save Settings to File
It allows you save current settings to a file.
1. From the left-hand Management menu, click on Reset factory default. The following page is displayed:
Figure 4: Reset to Defaults page
Option Description
Save Settings
to File
Save the VoIP Settings to a File
Load Settings
from File
Load Settings from a File
Reset
Settings to
Default
Reset VoIP Settings to Factory Default

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English