Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 121
13.1 Port filtering for TCP port 80
Please follow example below to deny the TCP port 80 for both Outbound and Inbound packet.
1. From the left-hand Firewall -> Port Filtering menu. The following page is displayed:
2. Check the option Enable Port Filtering to enable the port filtering.
3. Enter 80 and 80 in Port Range field.
4. From the Protocol drop-down list, select TCP setting.
5. Enter HTTP in Comment field.
6. Click Apply Changes.
7. Now the port filter that you created has been added and listed in the Current Filter Table.
8. Now the TCP port for both Outbound and Inbound packet has been denied.
Now you cannot visit any web site due to the TCP port 80 has been blocked by the Port Filtering rule that
created.

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English