Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 96
10.9 Operations of AP - AP being a registrar
AP mode
Whenever users enter station’s PIN into AP’s Wi-Fi Protected Setup page and click “Start PIN”, AP will
become a registrar. Users must start the PIN method on the station side within two minutes.
1. From the left-hand Wireless -> WPS menu. The following page is displayed:
2. Make sure AP is in un-configured state.
3. Enter the Client PIN Number.
4. Click Start PIN.
5. Users must start the PIN method on the station side within two minutes.
6. Users must start the PIN method on the station side within two minutes.

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English