Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 111
12.2 Configuring DHCP Client connection
Dynamic Host Configuration Protocol (DHCP), Dynamic IP (Get WAN IP Address automatically). If you are
connected to the Internet through a Cable modem line, then a dynamic IP will be assigned.
If your ISP wants you to connect to the Internet using DHCP Client, follow the instructions below.
1. From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
2. From the WAN Access Type drop-down list, select DHCP Client setting.
3. Click Apply Changes.
4. Click OK.

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English