Hamlet 300 - Web Configuration; Accessing the Web Interface

Wireless Access Point HNW300APN
User Manual 23
7. Web Configuration
The embedded web configuration allows you to manage the Access Point from anywhere through a
common web browser such as Internet Explorer or Firefox. Please note that JavaScript must be
enabled.
7.1 Accessing the Web Interface
1. Make sure your Access Points properly connected.
2. Prepare your computer/computer network to connect to
the Access Point.
3. Launch your web browser and type
“http://192.168.1.254” in the address bar.
4. An Enter Network Password window displays. Enter the
user name (“admin” is the default), password (“hamlet” is
the default) and click OK.
5. You should now see the Status page of the Router.