Wireless Access Point HNW300APN
User Manual 120
13. Port Filtering
Entries in Current Filter Table are used to restrict certain ports and types of data packets from your local
network to Internet through the Gateway. Use of such filters can be helpful in securing or restricting your
local network.
1. From the left-hand Firewall -> Port Filtering menu. The following page is displayed:
Option Description
Enable Port
Filtering
Enable/Disable the WAN packet filter.
Default setting is Disable.
Port Range Enter the port range to be filtered for both Outbound and Inbound packet
Protocol Select the Protocol to be filtered for both Outbound and Inbound packet
Both: To filter both TCP and UDP protocol
TCP: To filter only TCP protocol
UDP: filter only UDP protocol
Comment Fill in the note for manager what the purpose of certain port filtering rule
Current Filter
Table
The Port Filters that was created is listed here
Note: You must ensure that the single port or range specified does not overlap with a port or range for an
existing common or custom application.
To Next Page
Loading...
Need help?
General