Wireless Access Point HNW300APN
User Manual 117
12.5 Configuring L2TP connection
If your ISP/Network Administrator wants you to connect to the Internet using L2TP, follow the instructions
below.
1. From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
2. From the WAN Access Type drop-down list, select L2TP setting.
3. Enter IP Address/Subnet Mask/Server IP Address/User Name/Password provided by your ISP. Type
them in the relevant boxes.
4. Click Apply Changes.
5. Click OK.
To Next Page
Loading...