Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 66
10.5 WDS settings
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does.
To do this, you must set these APs in the same channel and set MAC address of other APs which you want
to communicate with in the table and then enable the WDS. To access the Wireless Network WDS settings
page:
From the left-hand Wireless menu, click on WDS settings. The following page is displayed:

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English