Wireless Access Point HNW300APN
User Manual 67
Configure WDS (Wireless Distribution System) only
1. From the left-hand Wireless menu, click on Basic Settings.
2. From the Mode drop-down list, select WDS.
3. From the Channel Number drop-down list, select a Channel.
4. Click Apply Changes button.
7. Change setting successfully! Click on OK button to confirm and return.
8. From the left-hand Wireless menu, click on WDS settings.
9. Check on the option Enable WDS.
10. Enter the MAC Address.
11. Enter the Comment.
12. Click the Set Security.
To Next Page
Loading...