Wireless Access Point HNW300APN
User Manual 56
10.2 Advanced Settings
These settings are only for more technically advanced users who have a sufficient knowledge about
wireless LAN. These settings should not be changed unless you know what effect the changes will have on
your Access Point. To access the Wireless Network Advanced Settings page:
From the left-hand Wireless menu, click on Advanced Settings. The following page is displayed:
Field Description
Fragment
Threshold
When transmitting a packet over a network medium, sometimes the
packet is broken into several segments, if the size of packet exceeds
that allowed by the network medium.
The Fragmentation Threshold defines the number of bytes used for the
fragmentation boundary for directed messages.
RTS Threshold RTS stands for “Request to Send”. This parameter controls what size
data packet the low level RF protocol issues to an RTS packet. The
default is 2347.
Beacon Interval Choosing beacon period for improved response time for wireless http
clients.
Preamble Type Specify the Preamble type is short preamble or long preamble
IAPP Disable or Enable IAPP
Protection A protection mechanism prevents collisions among 802.11g nodes.
RF Output
Power
TX Power measurement.
To Next Page
Loading...
Need help?
General