Wireless Access Point HNW300APN
User Manual 27
8.2 WAN Interface Setup
This page is used to configure the parameters for Internet network which connects to the WAN port of your
Access Point. Here you may change the access method to static IP, DHCP, or PPPoE by click the item
value of WAN Access type.
To change the WAN Access Type:
1. From the WAN Access Type drop-down list, select Static IP, DHCP Client, PPPoE, PPTP, or L2TP
setting determined by your Network Administrator or ISP.
2. Click Next>>.
To Next Page
Loading...