Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 71
7. From the left-hand Wireless menu, click on WDS settings.
8. Check on the option Enable WDS.
9. Enter the MAC Address.
10. Enter the Comment.
11. Click the Set Security.
12. This page allows you setup the wireless security for WDS. When enabled, you must make sure each
WDS device has adopted the same encryption algorithm and Key.
13. Configure each field with the Encryption that you selected.
14. Click Apply Changes button.

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English