8
2.2.2 Functional Description
Safety Mechanisms
－ Pressing the Emergency Disconnect switch rapidly cuts out all electrical functions in
hazardous situations.
－ Traveling speed will be automatically reduced after fork lifting 500mm.
－ Automatic speed reduction for cornering. Curve Control limits the speed and acceleration
when cornering. This reduces the risk of oscillations or tipovers.
－ Release braking, reverse braking, and three types of emergency braking can ensure safety of
traveling.
－ Anti-sliding function on slope can ensure safety of operation.
－ The belly button on top of operating handle can avoid the driber from injury effectively in case
of emergency during backward driving of the pallet truck.
－ The soft landing system reduces declining speed automatically when height from ground to
fork is less than 100mm, which provides effective protection for goods.
Frame system
－ The design of narrow body with large round corners makes the truck more suitable for
operation in concentrated goods shelves, and the wedgeg-shaped design of truck base offers
much higher passing ability.
－ Chassis welded by high-performance steel plate guarantees enough load capacity.
－ Stamping molded fork has higher strength and impact resistance.
－ Chassis adopts 4-wheel structure, including one drive wheel, one auxiliary wheel as
stabilizing and two load wheels, thus guarantee the good stability and safe travelling.
－ The truck has a folding operator platform and safety side arms.
Drive system
－ Adopted suspension design guarantees well wheel and ground contact, light turn and
convenient operation.
－ The high efficiency traction motor realizes high driving speed and strong climbing
performance.
Steering system
– The driver steers with a tiller.
– ESP(electric steering power) system offer easier and more flexible operation.
– The control handle of latest development is simple but beautiful, and all operations can be
done easily with on hand.
– The steering motion is transmitted directly from the steering controller via a steer motor
directly to the ring gear of the pivoted drive system.
Hydraulic system
－ Lifting and lowering are activated via the lift and lower buttons.
－ Modularization hydraulic power unit owns low noise, low vibration, stable and reliable lifting
To Next Page
Loading...
