54
7.7 Transporting load
Procedure:
－ Load unit positioned correctly on the forks.
－ Mast lowered for transport (approx. 150mm-500mm above the ground).
－ Accelerate and decelerate gradually.
－ Adapt your travel speed to the conditions of the route and the load you are transporting.
－ Travel at a constant speed.
－ Watch out for other traffic at crossings and passageways.
－ Always travel with a lookout at blind spots.
－ On slopes and inclines always carry the load facing uphill, never approach at an angle or turn.
CAUTION
The heavier pallet should always be transported below to avoid loss of stability.
To Next Page
Loading...
