1
Part Ⅰ: Operation and maintenance
1 Correct Use and Application
1.1 General
The industrial truck described in the present operating instructions is designed for lifting, lowering
and transporting load units.
It must be used, operated and serviced in accordance with the present instructions. Any other type
of use is beyond the scope of application and can result in damage to personnel, the industrial
truck or property.
1.2 Correct application
－ Lifting and lowering of loads.
－ Transporting the lowered loads.
－ Do not travel with a raised load (>500 mm).
－ In double deck mode the load carriage must not be raised higher than 1500mm. The bottom
load must be heavier than the top.
－ Do not carry or lift passengers.
－ Do not push or pull load units.
－ Do not work together on the same goods by multiple pallet trucks.
To Next Page
Loading...
